Colour Science & Perception
what the eye settles, and what it cannot
Concept

Flicker — where it appears

A light varying in time, which is invisible above a frequency that depends on the light level and on whether anything is moving. Whether it is seen depends on the eye's own clock rather than on the lamp's, so the same modulation is fused when the eye is still and visible when it moves.

Named by 7 essays across 3 fields — each of them below, with the objects they name alongside it.

Temporal sensitivity, and where each channel gives out. Modulation frequency in hertz against relative sensitivity. The luminance channel is band-pass, peaking at 8 hertz and running out at 60; an isoluminant modulation is low-pass and runs out at 15, which is 4.0 times sooner. Both cutoffs are at the same criterion of 5 per cent of that channel's own peak, so the ratio between them is a ratio between two measurements rather than between two conventions.

The eye has a shutter

An isoluminant flicker fuses at fifteen hertz and a luminance one at sixty, so a light whose colour changes forty times a second is a steady light of a colour it never emits. And the frequency at which flicker stops being visible is not a property of the eye — it moves twelve and a half hertz for every decade of light.

eye · Cones A 100 hertz drive, and whether anybody sees it. 3 cycles of a 100 hertz drive at 100 per cent modulation. The number beside each is how far above the threshold for seen flicker its loudest harmonic sits: above one and a stationary observer sees the flutter, below it and only something moving does. Fusion is at 60 Hz at 100 cd/m², and moves 12.5 Hz for every decade of light.

A lamp has a waveform

A lamp modulating a thousand times a second is a hundred times past the frequency at which flicker fuses, and it is plainly visible — as a dotted trail, during any glance across the room. The reason is not a new measurement; it is the spatial contrast sensitivity function, arriving from an unfamiliar direction.

light · Light The drift window, asked about each channel in turn. Every spatial frequency a channel can resolve, drifting at v degrees a second, arrives at f × v hertz; the bar is the range of v over which all of them stay above a quarter of that channel's temporal peak. The luminance band is closed at both ends — 0.018 to 0.71 degrees a second — because its temporal sensitivity has a dip at zero to fall into. The chromatic bands have no slow edge at all, because chromatic temporal sensitivity is low-pass: a stationary chromatic pattern sits at the top of its own sensitivity. The mark is the measured drift, and it is inside all three.

The drift is a luminance mechanism

The eye's own drift was shown to sit inside a band of speeds that keeps every spatial frequency modulating, and the band was quoted as though it were about vision. Asked about colour, it has no slow edge at all — a stationary chromatic pattern needs no eye movement whatever. And a stabilised chromatic pattern is the first thing to fade.

eye · Cones Dimmed to a fiftieth, three ways. Switching a lamp on and off faster than anyone can see scales the spectrum and changes nothing else, so its colour temperature is a horizontal line and its chromaticity moves by 7.3e-14 ΔE00 — exactly, to floating point. Reducing the drive current moves the die's peak and cools the junction, which moves the mixture: ΔE00 3.5 across the range. A filament has no spectrum of its own to move; it is a blackbody at whatever temperature the power leaves it at, and it falls 1672 K. Three methods, one instruction, three colours.

Three ways to dim a lamp

"Dimmed to ten per cent" names three different colours. Switching the lamp on and off faster than anybody can see changes the chromaticity by nothing at all — exactly, to floating point. Reducing the current moves it a few units. Reducing the power to a filament moves it eighteen hundred kelvin down the Planckian locus, and stays on the locus exactly the whole way.

light · Light The same flicker, written across the frame. A rolling shutter exposes each row of the sensor at a different moment, so a lamp that flickers above fusion is recorded as bands. There are 1.7 of them here — the readout time times the lamp's frequency, which is a camera setting and not a property of the light — spanning 2.37 stops. Held at matched luminance the lightest band and the darkest are still ΔE00 5.40 apart in colour, because the two drive currents are two spectra and the shutter caught one of each.

The shutter samples the lamp

A lamp switched between two drive currents at a hundred hertz is one steady colour to a person and two spectra to a camera. A thousandth-of-a-second exposure catches whichever phase the shutter opened at — two and a third stops of exposure and five units of colour, decided by nothing but timing — and a rolling shutter writes the difference across the frame as bands.

imaging · Capture Three ways to dim a lamp, and only one of them is free. What an adapted observer is left with, as the same lamp is taken down to one per cent by each of the three methods. Duty-cycle dimming lies exactly on zero at every depth: it scales the spectrum, a scaling is a gain in every basis, and adaptation removes all of it. Current dimming moves the pump and the phosphor apart and leaves 0.15 at a tenth. A filament follows the Planckian locus, which is the largest chromaticity change of the three and leaves 3.63 — the ordering by chromaticity and the ordering by what a person sees are not the same ordering.

Only one dimmer is invisible

An earlier essay separated the three ways to dim a lamp by the chromaticity each arrives at. Asked instead what an adapted observer is left with, the ordering is different and one method comes out at exactly zero — a duty cycle is a scaling, a scaling is a gain in every basis, and adaptation removes all of it at every depth.

light · Light The confusion matrix, and which corner the common lamps are in. Twelve fixtures sorted two ways. Down the page is what their spectra are; across is what flicker says. The two corners on the diagonal are 7 fixtures the classifier gets right. The 3 missed are structured lamps that do not flicker — a white LED and a warm LED on constant drivers, and a three-emitter fixture — and those are the lamps most modern interiors are lit by. The 2 false alarms are smooth lamps that do flicker: a halogen lamp on mains and a tinted radiator, both of which a photograph of a room is quite likely to contain.

Flicker sorts lamps the wrong way

A camera cannot see a spectral line in its own white, so the essay on the two-matrix profile named the classifiers a device might have instead, and the first of them was flicker. Flicker is measurable, and it measures the wrong thing. It sorts lamps by how their power is delivered while the matrix needs them sorted by how their spectrum is shaped, and the two are independent: a white LED on a constant driver is perfectly steady and strongly structured, and it is what most indoor photographs are lit by.

imaging · Capture

Named alongside it

The objects these essays reach for when they reach for this one.

Temporal sensitivitySpectral power distributionCritical fusion frequencyAdaptationContrast sensitivityLED emissionLuminanceQuality controlSpatial frequencySpecificationWhite LEDAssertion

All concepts