Colour Science & Perception
what the eye settles, and what it cannot
Concept

LED emission — where it appears

A semiconductor emitter, which for white light is usually a blue die behind a phosphor that converts part of its output. Nothing in such a device produces a photon shorter than the die's wavelength, so it emits no ultraviolet at all.

Named by 11 essays across 3 fields — each of them below, with the objects they name alongside it.

triphosphor fluorescent — three narrow phosphors plus the mercury lines, and the white it produces. The spectral power distribution of a triphosphor source, normalised to its own peak, and the colour a perfect white reflector takes under it: chromaticity (0.3379, 0.3389), correlated colour temperature 5258 K at Duv -0.0035. The white looks ordinary. The spectrum producing it does not.

A lamp is not a blackbody

A fluorescent tube puts a third of its light into four mercury lines. A white LED is a blue spike with a hole beside it. Both are sold by a colour temperature, and a colour temperature says nothing about either.

light · Light Luminous efficacy of a monochromatic source, under the 2° observer. Lumens per watt against wavelength. The curve is the luminous efficiency function scaled by 683, which is what luminous efficacy of radiation is — the 1979 redefinition of the candela fixed 555 nm at exactly 683 lm/W and everything else follows. Marked at 450 nm (26 lm/W), 500 nm (221 lm/W), 555 nm (683 lm/W), 600 nm (431 lm/W), 650 nm (73 lm/W). Under this observer the peak reaches 683 lm/W.

What a lamp cannot give back

Six hundred and eighty-three lumens per watt is not a measurement of anything. It is the definition of the candela, it is a ceiling no white light can approach, and the distance between a lamp and that ceiling is mostly the price of being able to see what colour things are.

light · Light What separates the separations, and under which light. 11 separations of a single colour, differing only in how much of it is carried by black rather than by the three chromatic inks. Under D50 they agree to ΔE00 = 0.00 — the solver was asked for that and delivered it. Under illuminant A they spread to 6.75. They are metamers of one another, and the whole family is invisible to any instrument reading a single illuminant.

The lamp in the shop decides

Two packages printed to the same specification, verified under the same standard illuminant and passed, can differ by nearly seven colour differences on a shelf under a tungsten lamp. Nothing went wrong at either press. The specification named one light, the separations that satisfy it are metamers of one another, and the shop chose the second light.

applied · Delivery The same flicker, written across the frame. A rolling shutter exposes each row of the sensor at a different moment, so a lamp that flickers above fusion is recorded as bands. There are 1.7 of them here — the readout time times the lamp's frequency, which is a camera setting and not a property of the light — spanning 2.37 stops. Held at matched luminance the lightest band and the darkest are still ΔE00 5.40 apart in colour, because the two drive currents are two spectra and the shutter caught one of each.

The shutter samples the lamp

A lamp switched between two drive currents at a hundred hertz is one steady colour to a person and two spectra to a camera. A thousandth-of-a-second exposure catches whichever phase the shutter opened at — two and a third stops of exposure and five units of colour, decided by nothing but timing — and a rolling shutter writes the difference across the frame as bands.

imaging · Capture Three ways to dim a lamp, and only one of them is free. What an adapted observer is left with, as the same lamp is taken down to one per cent by each of the three methods. Duty-cycle dimming lies exactly on zero at every depth: it scales the spectrum, a scaling is a gain in every basis, and adaptation removes all of it. Current dimming moves the pump and the phosphor apart and leaves 0.15 at a tenth. A filament follows the Planckian locus, which is the largest chromaticity change of the three and leaves 3.63 — the ordering by chromaticity and the ordering by what a person sees are not the same ordering.

Only one dimmer is invisible

An earlier essay separated the three ways to dim a lamp by the chromaticity each arrives at. Asked instead what an adapted observer is left with, the ordering is different and one method comes out at exactly zero — a duty cycle is a scaling, a scaling is a gain in every basis, and adaptation removes all of it at every depth.

light · Light The lamps the four conditions shine, where they differ. The short-wave half of what each measurement condition puts on the sample, plotted to 560 nanometres because past that the three are indistinguishable in shape. M₁ is D50 with its ultraviolet; M₂ is the same lamp behind a cut filter at 400 nanometres, and at 360 it is 0.0 per cent of what M₁ delivers; M₀ is a tungsten lamp, which has some ultraviolet, has less than daylight, and is not specified at all by the standard — so two M₀ instruments need not agree with each other. M₃ is not plotted because its lamp is M₂'s; what makes it a fourth condition is a polariser.

The lamp that stopped emitting ultraviolet

A blue-pumped white LED has a die at 450 nanometres and emits nothing shorter. Between about 2005 and 2020 that lamp replaced almost every other indoor source, which removed the excitation supply from a great many rooms — so brightened materials stopped glowing indoors without a single one of them being reformulated.

imaging · Capture Two matrices blended by colour temperature, under fourteen lamps. For each lamp, with the neutral held exact as a converter holds it: the mean colour difference over twelve test surfaces with a matrix fitted under that lamp (the short bar) and with the tungsten and daylight matrices blended at the weight its correlated colour temperature gives (the long bar). Smooth lamps on or near the locus sit within 6 per cent of their own matrix. The lamps with lines or narrow bands in them sit a median of 2.2 times theirs, from 1.38 for a broadband tube to 5.2 for a three-emitter source.

Two matrices do not reach a white LED

A camera profile's two matrices, blended by the scene's colour temperature, are as good as a matrix fitted anywhere along daylight. Under a white LED or a fluorescent tube the same blend leaves colours twice as far off as a matrix fitted under that lamp, and no weight inside the profile's range repairs it. What decides it is not how far the lamp sits from the Planckian locus — a triphosphor tube sits nearly on it and fares worst — but whether its spectrum has lines in it, which a white balance reading cannot see.

imaging · Capture The confusion matrix, and which corner the common lamps are in. Twelve fixtures sorted two ways. Down the page is what their spectra are; across is what flicker says. The two corners on the diagonal are 7 fixtures the classifier gets right. The 3 missed are structured lamps that do not flicker — a white LED and a warm LED on constant drivers, and a three-emitter fixture — and those are the lamps most modern interiors are lit by. The 2 false alarms are smooth lamps that do flicker: a halogen lamp on mains and a tinted radiator, both of which a photograph of a room is quite likely to contain.

Flicker sorts lamps the wrong way

A camera cannot see a spectral line in its own white, so the essay on the two-matrix profile named the classifiers a device might have instead, and the first of them was flicker. Flicker is measurable, and it measures the wrong thing. It sorts lamps by how their power is delivered while the matrix needs them sorted by how their spectrum is shaped, and the two are independent: a white LED on a constant driver is perfectly steady and strongly structured, and it is what most indoor photographs are lit by.

imaging · Capture How far each lamp's sensor reading is from what the camera predicts, with RGB + clear. Fourteen lamps, six smooth and eight structured, each scored by how far an ambient-light sensor with red, green, blue and clear channels reads from what the camera's white predicts through a map fitted on smooth radiators and daylights. The smooth lamps score at most 0.057 and the structured at least 0.133; the dashed line is the threshold at the gap's geometric middle, 0.087. The lights the map was fitted on score at most 0.0113. Every lamp falls on its own side of the line.

Two sensors disagree about deep red, not lines

A phone's ambient-light sensor and its camera read the same lamp differently, and the difference sorts fourteen lamps into smooth and structured without a single mistake — where flicker made five. It is not reading their lines. Almost all of it comes from the sensor's clear channel collecting deep red the camera's infrared cut throws away, so daylight with its far red trimmed is called structured and a white LED with a far-red emitter is called smooth.

imaging · Capture The calibration error a narrow fourth channel survives, by where it is placed. For a red, green and blue ambient sensor with one more channel 10 nm wide, centred from 450 to 640 nm: the first calibration error at which some lamp of fourteen is misclassified. Dashed: the channel pooled into the whole residual, as the ambient sensor's disagreement was read; its best is ±1.50 per cent. Solid: the channel read on its own, as its departure from what the camera's white predicts for it; its best is ±4.0 per cent, at 450 nm. Crosses mark centres where the channel read alone does not separate the lamps at all. The two horizontal lines are the red, green and blue design (±1 per cent) and the design with a clear channel (±4 per cent).

A narrow channel has to be read on its own

An ambient sensor with a clear channel tells structured lamps from smooth ones by reading deep red, and one without it reads structure but breaks at one per cent of calibration error. A narrow fourth channel between the camera's peaks was proposed to have both. Pooled into the sensor's disagreement with the camera, it reads structure and breaks at one and a quarter per cent — no better than the design it was meant to rescue. Read on its own, as its departure from what the camera predicts for it, a channel at 450 nm holds to four per cent, the clear channel's figure, and far red does not move it.

imaging · Capture Four ways to correct the corner, under each of four lamps, at 25°. The mean colour error left on the chart's coloured patches at the corner of the frame, under each lamp, after: the red row fitted under that lamp; one red row fitted on the chart under all four lamps with the grey held under daylight; a grey-card gain map calibrated under daylight; and the worst of the other lamps' rows used by mistake. daylight: 0.93, 1.33, 1.86, 4.91; tungsten: 0.99, 1.45, 1.87, 3.26; white LED: 0.36, 1.39, 3.28, 1.77; fluorescent: 0.37, 1.56, 3.09, 2.45. The pooled row holds every lamp between 1.33 and 1.56.

One row for every lamp costs the lamps that lose least

A corner correction fitted under one lamp is right under that lamp and can be badly wrong under another, so a converter unsure of its lamp was offered a single row fitted under several at once. Pooled over four lamps, one row holds every lamp's corner between 1.33 and 1.56 colour differences — no lamp worse than a grey-card map, and none near the 4.91 a wrong row can leave. The price falls on the white LED and the fluorescent tube, which it leaves four times worse than their own rows, because they lose the least red at the corner and the pooled row is built to repair the lamps that lose the most. Two rows, one per class of lamp, keep almost all of both.

imaging · Capture

Named alongside it

The objects these essays reach for when they reach for this one.

FluorescentCalibrationColour matrixCamera rawIdentifiabilityCamera profileColour renderingCorrelated colour temperatureDuvFlickerIlluminantInfrared

All concepts