Colour Science & Perception
what the eye settles, and what it cannot
Concept

Dichromatic model — where it appears

A construction predicting what a dichromat matches, by projecting the trichromatic response onto the plane the two surviving receptors span. It rests on the reduction hypothesis — that the surviving receptors are unchanged — and on anchor stimuli both kinds of observer agree about.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

Recovering the lamp from a highlight rather than from an assumption. A green scene under illuminant A. The faint curve is the true lamp; the solid one is what the interface component of the glossy surfaces recovers, which is 0.30° from it. Grey-world on the same scene is 42.1° and max-RGB 17.5°, because both are assumptions about the surfaces and a Fresnel reflection is not.

The highlight is the white balance

Every estimator a camera uses is an assumption about the scene wearing the costume of a measurement. The specular component of a glossy surface is not — it carries the illuminant to within a third of a degree on a scene where averaging is fifty times worse, and it does so without knowing what colour the paint underneath is.

imaging · Capture One observer's matching functions, in three of the bases the matches leave free. The three colour-matching functions after a change of basis 0.00 of the way from Hunt–Pointer–Estévez towards the set built from the dichromat confusion points. Every one of these triples predicts exactly the same matches as every other, because a match is an equality and a matrix applied to both sides of an equality changes nothing. What moves is where the peaks are and whether the curves go negative — these ones do not, and going negative is what the 1931 committee constructed XYZ to avoid.

The matches do not name the cones

Colour matching is the whole empirical basis of colorimetry, and it fixes the observer's three curves only up to a nonsingular 3×3 — nine numbers that no match, in any quantity, to any precision, can see. One particular choice of those nine is used throughout here, and it was made for a different purpose.

eye · Cones Where a dichromat's confusions converge. Every pair of colours a protanope cannot tell apart lies on one of these lines, and all the lines meet at a single point — at (0.7465, 0.2535) for this class. The point is the chromaticity of the missing cone's own response direction, which is why it need not lie inside the diagram or correspond to any light at all. Two of the three do not. The three points between them carry six numbers, and six is two thirds of what the matching data leave undetermined.

A confusion point is a missing pigment

The nine numbers colour matching leaves free are fixed by three points on a chromaticity diagram, each of them the place where everything one class of dichromat cannot tell apart converges. Two of the three lie outside the diagram entirely, which is not a defect — a direction in tristimulus space need not correspond to a light.

eye · Cones Four ways to fill in a clipped highlight: a glossy surface with a reflection of the lamp, under tungsten. Twenty-four chart surfaces under tungsten, as a glossy surface with a reflection of the lamp, taken up a ramp until their raw channels reach the sensor's ceiling. Each line is the mean colour difference, at equal lightness, between the true colour and what one response to the clipped reading makes of it: clipping to white, carrying the clipped values through, filling the clipped channel from the surface's own ratio, and filling it from the surface's colour plus the lamp's. At 0.4, where most surfaces have one channel clipped, the four leave 5.87, 4.37, 5.56, 0.00; at 2, 2.90, 26.97, 8.18, 8.18.

Filling in a highlight is a claim about the surface

A converter that rebuilds a clipped channel has to say what the highlight was. A matt surface over-exposed keeps its own colour, and filling the lost channel from that colour is exact. A glossy highlight is the surface's colour plus a reflection of the lamp, and the same fill leaves it 7.6 colour differences too colourful — while a fill that solves for surface and lamp is exact. Neither works once two channels are clipped, and a tungsten lamp keeps a highlight in the one-channel band more than twice as long as daylight does.

imaging · Capture

Named alongside it

The objects these essays reach for when they reach for this one.

Camera rawColour vision deficiencyCone fundamentalsConfusion lineCopunctal pointDegrees of freedomIdentifiabilitySpecularWhite balanceAngular errorClippingColour-matching functions

All concepts