Every essay — page 53
What light is What the eye does Matching and measuring Difference and uniformity What the brain does What a scene does What a camera does Where the model breaks What it takes to deliver it
SeriesObserversNamed objectsRefutationsSearch
What it takes to deliver it
A colour that stays where it was measured is nobody's problem. This is the apparatus that carries one to somebody else — ink on a sheet, a profile, a rendering intent, a proof, and a room — and every stage of it is a map that loses something, chosen deliberately.
Sharpened type errs on its dark side
A sharpened square hides its halo along its edges and shows it at its corners, so a sharpened page of type was predicted to show its error at the corners of its letters, several times out of proportion to their length. Black type does the opposite: its outer corners and stroke ends hold between two thirds and nine tenths of their share. As the eye leaves it, the error lies on the dark side of every edge, and a corner holds as much of it as it has dark ground around it — a quarter of a disc where a black corner points out into paper, three quarters where black wraps round a pale one.
A strategy keeps the refit only where black prints
Refitting an inverse table's nodes against their own error halves it, and in a four-ink table the refit has to leave the separation strategy's choice of black alone. Held to the strategy, it keeps the whole of its gain wherever the strategy prints black and almost none of it where the strategy does not — and the share it keeps equals the share of the grey ramp printed with black, to within three hundredths. The start of black generation, predicted to be where the refit would fail, is where the table needs it least.
A serif moves the error and adds little
When a scanned page is sharpened on its stored values, the error the eye sees lies on the dark side of every edge, so black sans-serif type does not gather it at its corners. The worry was that a serif changes that: every stroke end gains a bar and every bar an inside angle, the configuration where large letters did gather error. It does not. Black serif type's brackets hold three quarters of their share of the error and its serif tips half. Reversed, the serif tips hold two and a half times theirs. Across both, serifs lengthen the outline by a tenth and the error by a few per cent — they move it, and in black type away from the corners.
A little black ends the cast
A four-ink inverse table errs by a warm cast along the grey axis wherever the separation strategy prints only three inks, and almost only in lightness wherever it prints black. Real strategies start black gently, and the gentle start was expected to keep the cast until black carried much of the grey. It does not. The cast falls to a tenth of its three-ink size once black supplies a tenth to a sixth of the grey's darkening, at every toe from nothing to thirty units wide — because inside the toe the table's chord runs along the trade of black against the other three inks, which errs in lightness. What the toe does cost is the segment where black begins, which goes from the table's best to its worst.
A hairline spills its error onto the paper
Sharpening a scanned page on its stored values errs on the dark side of every edge, which is why black type's serifs hold less than their share of the error at text sizes. A hairline serif, a tenth of a stem, was expected to change that at display sizes: its dark side is so thin that the halo would wrap its corners. It does not. From 12 to 48 point, black type's hairline tips hold a third to three fifths of their share, less than slab serifs' tips, and the share falls as the letter grows. What gathers at display sizes is the junction of bar and stem, with or without serifs — and where the scan lands the letter against the pixels moves a tip's share more than its size does.
The cast returns where black is steep
Below a black-generation toe a four-ink table's grey picks up a small cast again, up to a third of the three-ink cast at the widest toe, and the explanation offered was the jump in black's curvature where the toe ends. It is not. A toe whose curvature is nothing at its end returns exactly the same cast, segment for segment, and a kink put into straight black casts in its own segment once in twelve tries. What the returned cast follows is how steep black has to be once the toe is done — how far the chromatic inks climbed while black was held back, and how fast they then have to come down.
An ink limit takes the shadows' cast away
A cap on total ink forces black up and the chromatic inks down where it is reached, which is the descent that brought a small cast back below a black-generation toe, and the prediction was that a cap would bring one back too. Measured against what the same strategy prints with no cap, it does the opposite. Below where it binds the cap decides the separation outright — nine strategies print one table there — and in 32 of 33 cases its shadows cast less than the strategy's own would have.
A junction gathers by the width of its stem
Black type sharpened on its stored values gathers its error at the junctions of bar and stem, and gathers more as the letter grows. The mechanism offered for that was the stem growing past the eye's pool, which predicts that size is only standing in for the stem's width in pixels. Drawn at three weights and five sizes, the junctions' share ranks with the stem's width at 0.97 and with the point size at 0.85, and where two weights have stems within six tenths of a pixel of each other their junctions agree to within a tenth. The width is nearly the whole story. The part it leaves over is small and one-sided: at the same stem width, the heavier letter gathers a little more in five pairs of six.
A closed counter adds a little to a junction
Sharpened on its stored values, black type's junctions — the inside angles where a bar meets a stem — gather error by the stem's width in pixels, and at equal widths a heavier letter gathers slightly more. A heavier letter differs in two ways: it is smaller around its stem, and its counters are narrower. Holding the stem and moving the spacing separates them. At equal stem widths, closing the counters adds about four hundredths of their share to the junctions and one hundredth to the stroke ends, and twice as much to E and H, whose bars face each other across a counter, as to L and T. The prediction was the counter, and the counter it is — by an amount no larger than a sub-pixel position moves it. Drawing the letters apart found the stem census's light H with its crossbar floating.
Width and height each carry half the counter's gain
Closing a sharpened letter's spacing at a fixed stem width raised its junctions' share of the error the eye sees by about four hundredths, and the spacing moved the letter's width and height together. A type family's condensed and extended faces separate them: the counters across the letter narrow while its height and stem stay put. The prediction was that the condensed letters' junctions would carry the whole four hundredths. They carry half — 0.023 — with the stroke ends moving by four thousandths. Shortening the letter at one width carries the other half, also 0.023, and the two add to within four thousandths of what closing both did. Each half is found where its own counter lies — condensing gains most in the H, shortening in the E — and the T, which has no counter across it, gains nothing when condensed. Neither half, on its own, is larger than one and a half times the scatter a sub-pixel position produces.
A knee in the ink limit quiets the shadow
A cap on total ink coverage quiets a four-ink table's shadow, and the one segment where the cap is first reached is quiet or loud depending on where the binding point falls among the table's nodes: inside a segment it is quiet, within a quarter of a segment of a node it is not. A real cap is approached through a knee. The prediction was that a knee as wide as a segment would make the binding segment quiet wherever it fell, and that a knee much wider would turn the cap into a steep straight black that casts like the heavy-black strategy. The first half holds only in part: a five-unit knee halves the binding segment's cast and quiets three of the nine loud ones, but those whose binding point sits within a quarter of a segment of a node stay louder than a neighbour. The second half is wrong in sign. A wider knee leaves the whole capped shadow quieter at every step — its mean cast falls from 11.5 thousandths to 3.0 at fifteen units — because a knee spreads the chromatic inks' forced descent, and a slower descent is one the table's straight lines between nodes can follow.
Off the grey axis a knee trades hue for chroma
Along the grey axis a total-ink cap approached through a knee quiets the cast a four-ink table prints between its nodes, because the knee slows the chromatic inks' retirement where black takes over. In a saturated shadow the chromatic inks carry the colour, and the prediction was that a knee would quiet the hue error there in the same way, a fifteen-unit knee halving the worst segment's. On two rays of dark colours, a deep blue and a brown, it does quiet the hue — every wider knee lowers it on both — and halves the worst segment's on the blue, to 0.28 of the hard cap's, but not on the brown, at 0.68, whose inks the knee slows far less. And the hue was never the main error. Between nodes the table prints these colours duller than asked, its chroma error five to eight times its hue error, and every wider knee makes that loss slightly worse, so the table's total error rises as its hue error falls. The cap itself, met hard, halves the blue's error, as it removed the grey's cast; on the brown it changes almost nothing.