Colour Science & Perception
what the eye settles, and what it cannot
Concept

Camera sensitivity — where it appears

How much a camera's channel responds at each wavelength, being the product of a colour filter's transmission and the sensor's own quantum efficiency. Whether these are a linear mixture of the observer's colour-matching functions decides whether the camera has metamers of its own.

Named by 4 essays across one field — each of them below, with the objects they name alongside it.

A camera's dye widths are free under one requirement and not under another. Three panels, one per dye. In each, a pair of bars per requirement: how far that dye's centre wavelength and its bandwidth can move before the requirement gets five per cent worse. Under the adaptation objective — the one the previous round measured — every width has far more room than its centre, which is the finding that put a tolerance budget on the centres. Throughput and the colour matrix's noise gain, the two requirements that objective was said to be silent about, reach the edge of the search in every direction and hold nothing. What tightens the widths is the Luther residual, which was in the model already. The bottom pair in each panel is what survives all four.

The widths were free because nothing else was asked

A camera's three dye bandwidths carry almost all of the flattest direction of the adaptation objective, so that objective says a tolerance budget belongs on the centre wavelengths. The two requirements it was said to be silent about turn out not to bind either — and the one that does was in the model already.

imaging · Capture What a camera's dye 1 is allowed to be, under four requirements. The plane a colour-filter dye is designed in: its centre wavelength across, its bandwidth up, both in nanometres, so the two axes are comparable and the shapes mean something. Four outlines, one per requirement, each the set of dyes within five per cent of the designed one on that requirement; the shaded region is where all four hold. Two of the four — throughput and the colour matrix's noise gain — reach the edge of the search in every direction and are invisible as boundaries. The intersection is ±6.8 nanometres of centre and ±13.3 of width, against the adaptation objective's own ±20.6 in width alone.

Two tolerances do not meet in a tolerance

A specification lists requirements separately and a manufacturer has to satisfy them together. Where two long thin regions cross at an angle, what is left is much smaller than either, its longest direction is neither of theirs, and no list of tolerances describes it.

imaging · Capture How far each lamp's sensor reading is from what the camera predicts, with RGB + clear. Fourteen lamps, six smooth and eight structured, each scored by how far an ambient-light sensor with red, green, blue and clear channels reads from what the camera's white predicts through a map fitted on smooth radiators and daylights. The smooth lamps score at most 0.057 and the structured at least 0.133; the dashed line is the threshold at the gap's geometric middle, 0.087. The lights the map was fitted on score at most 0.0113. Every lamp falls on its own side of the line.

Two sensors disagree about deep red, not lines

A phone's ambient-light sensor and its camera read the same lamp differently, and the difference sorts fourteen lamps into smooth and structured without a single mistake — where flicker made five. It is not reading their lines. Almost all of it comes from the sensor's clear channel collecting deep red the camera's infrared cut throws away, so daylight with its far red trimmed is called structured and a white LED with a far-red emitter is called smooth.

imaging · Capture The calibration error a narrow fourth channel survives, by where it is placed. For a red, green and blue ambient sensor with one more channel 10 nm wide, centred from 450 to 640 nm: the first calibration error at which some lamp of fourteen is misclassified. Dashed: the channel pooled into the whole residual, as the ambient sensor's disagreement was read; its best is ±1.50 per cent. Solid: the channel read on its own, as its departure from what the camera's white predicts for it; its best is ±4.0 per cent, at 450 nm. Crosses mark centres where the channel read alone does not separate the lamps at all. The two horizontal lines are the red, green and blue design (±1 per cent) and the design with a clear channel (±4 per cent).

A narrow channel has to be read on its own

An ambient sensor with a clear channel tells structured lamps from smooth ones by reading deep red, and one without it reads structure but breaks at one per cent of calibration error. A narrow fourth channel between the camera's peaks was proposed to have both. Pooled into the sensor's disagreement with the camera, it reads structure and breaks at one and a quarter per cent — no better than the design it was meant to rescue. Read on its own, as its departure from what the camera predicts for it, a channel at 450 nm holds to four per cent, the clear channel's figure, and far red does not move it.

imaging · Capture

Named alongside it

The objects these essays reach for when they reach for this one.

CalibrationCamera profileChromatic adaptationColour matrixCondition numberDeclared inputEigenvalueFluorescentIdentifiabilityInfraredLED emissionLuther condition

All concepts