Colour Science & Perception
what the eye settles, and what it cannot
Generator

What a display's red primary is allowed to be, under four requirements at once

A close view of the chromaticity plane around one designed primary, 0.101 units across. Four outlines: the set of positions the primary can take before each of four requirements gets one per cent worse — how well a gain in the display's own basis undoes a change of light, how much of the diagram the three primaries enclose, how many real surfaces fall inside them, and whether a light of that colour exists at all. The shaded region is where all four hold. It is 5% of the smallest outline's area, because the outlines are long and thin and cross at an angle rather than nesting. adaptation holds 42% of its boundary, gamut holds 10% of its boundary, realisable holds 48% of its boundary.
What a display's red primary is allowed to be, under four requirements at once. A close view of the chromaticity plane around one designed primary, 0.101 units across. Four outlines: the set of positions the primary can take before each of four requirements gets one per cent worse — how well a gain in the display's own basis undoes a change of light, how much of the diagram the three primaries enclose, how many real surfaces fall inside them, and whether a light of that colour exists at all. The shaded region is where all four hold. It is 5% of the smallest outline's area, because the outlines are long and thin and cross at an angle rather than nesting. adaptation holds 42% of its boundary, gamut holds 10% of its boundary, realisable holds 48% of its boundary.

Drawn at its defaults, in a tolerance under more than one objective. It reads 3 options and no others: show, which, channel.

Called by 5 essays

the blast radius of changing it

What a camera does

The widths were free because nothing else was asked

A camera's three dye bandwidths carry almost all of the flattest direction of the adaptation objective, so that objective says a tolerance budget belongs on the centre wavelengths. The two requirements it was said to be silent about turn out not to bind either — and the one that does was in the model already.

 What a camera does

Two tolerances do not meet in a tolerance

A specification lists requirements separately and a manufacturer has to satisfy them together. Where two long thin regions cross at an angle, what is left is much smaller than either, its longest direction is neither of theirs, and no list of tolerances describes it.

 Matching and measuring

A primary is chosen for four things

A display's primaries have to adapt well, cover the diagram, hold the surfaces anybody photographs, and be colours a light can actually have. Drawing all four tolerance regions around one primary shows that no single requirement decides where it can go, and that one of the four never decides anything.

 Matching and measuring

A tolerance in the wrong coordinates

A display primary's tolerance is written as a region in chromaticity, because that is where the colorimetry lives. Nobody has a knob for chromaticity. What a maker of an emitter sets is a peak wavelength and a bandwidth, and the map between the two is so anisotropic that on the red primary its condition number is over eleven thousand.

 Matching and measuring

What one number accepts

A delivery tolerance is written as a single colour difference and it acts on three tristimulus values, so what it actually accepts is a closed surface. Measured over sixty-four colours in the sRGB cube, the volume inside that surface varies by a factor of a hundred thousand and its longest axis is between three and thirty times its shortest. The same contract, applied to a dark colour and a light one, is two different requirements.

All 155 generators · what each essay asks for instead